178
Configuring Network Authentication (by a Remote Accounting server)
Network authentication uses the user information managed on a remote Accounting server to manage
authentication (access) to available machine services.
Enable Network Authentication
To enable Network Authentication for use with this Device, at your networked workstation, perform the
following steps:
1.
Open your Web browser and enter the TCP/IP address of the machine in the Address or Location field.
Press
Enter
.
2.
Click the
Properties
tab.
3.
Select the
Security
folder, then the
Authentication Configuration
hot link.
4.
Select
Login to Remote Accounts
from the Login Type drop-down list, then
Network Accounting
from the Accounting Mode drop-down list.
5.
Place a checkmark in the
Enable
box for each service that you wish to restrict access to. For
explanations of each service, click the Help button.
6.
Do not place a checkmark in the
Non-account Print
box if you wish to enable people without accounts
to continue to print.
7.
From the
Verify User Details
drop-down menu, select either Yes or No (keep logon records). The
Yes selection will verify user information. When No (keep logon records) is selected, User ID and
Account ID must be entered at the Device, but user information will not be checked. A logon record
will be kept by the Device, however.
8.
If a Guest User box is available and configurable, consider whether it is advisable in your network
environment to allow simple password, guest access to this restricted service device. The default
setting is Off.
9.
If you wish to allow guest access, enter your guest password twice in the boxes provided.
10. Click
Apply
and enter the Administrator User name and password when prompted.
11. Click the
Reboot Machine
button, then
OK
, when prompted.
12. Refresh your web browser, then click on the
User Details Setup
link to set the Store User Details
setting. Note that you can set either NVM or hard disk as the destination for saved authentication
information. User Details Setup also allows you to configure the characteristics of the login prompt for
User Authentication.
Summary of Contents for WorkCentre 7335
Page 1: ...System Administrator s Guide 701P47693 WorkCentre 7328 7335 7345...
Page 12: ...x...
Page 300: ...701P47693...
