51
NetBIOS over IP Peer to Peer Printing
Before You Start
1.
Obtain the Print Driver for your workstation's operating system. Drivers are available on one of the
CD-ROMs that came with your Device. They are also typically available for downloading in self-
extracting Zip file format from the Internet at www.xerox.com.
2.
Print a
Configuration Report
as stated under the
Network Connectivity Tab
of this guide.
3.
On the Configuration Report,
verify that "SMB" is enabled
. Also,
verify that TCP/IP is enabled
as
one of the supported protocols. Verify that the
workgroup's default name is Workgroup
,
or a valid,
15 character maximum, workgroup name. Also note the
Device's SMB Host Name
(which assures
the uniqueness of the Device's name within the Workgroup). To enable "SMB," if required, follow the
procedure stated under the Microsoft (NetBIOS over IP) item of the NOS Selection menu, accessed
from the
Network Connectivity Tab
of this guide. To modify the name of the Workgroup, or Device's
name (SMB Host name) within the workgroup, use your workstation's Web browser to access the
Internet Services (Web Pages) residing in the Device, as described under the Configure SMB menu
item, under the
Internet Services Tab
of this guide.
4.
Make sure to configure the DNS/WINS Server(s) for NetBIOS name to IP address resolution. Then
provide the Device with the addresses of the Servers as stated in the
Configure TCP/IP Settings
procedure of the Internet Services section of this guide.
Summary of Contents for WorkCentre 7335
Page 1: ...System Administrator s Guide 701P47693 WorkCentre 7328 7335 7345...
Page 12: ...x...
Page 300: ...701P47693...
