259
Configure LPD
1.
Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.
Press
Enter
.
2.
Click the
Properties
tab.
3.
Click the plus symbol (+) to the left of
Connectivity
, then the
Protocols
file folder.
4.
Select
LPD
in the directory tree.
5.
The available selections include:
Port Number, with a default value of 515. As this is the port for the TCP Spooler assigned by the IANA
(Internet Assigned Numbers Authority), the default value should not need to be changed.
A TBCP Filter checkbox (displayed when PostScript is enabled).
Connection Time-Out entry box.
Maximum Number of Sessions: Enter the maximum number of simultaneously connected hosts for this
interface (or accept the default value).
6.
Enter a Time Out value for jobs being sent to the Device through this Port. This is the length of time
that the Controller will wait for an end of job command before printing the current job.
7.
Click the
Apply
button to accept the changes, or the Undo button to return the settings to their
previous values.
Note: Changes to settings are not applied until you restart the Device. A Reboot Machine button is
available on the Status Tab of Internet Services.
Summary of Contents for WorkCentre 7335
Page 1: ...System Administrator s Guide 701P47693 WorkCentre 7328 7335 7345...
Page 12: ...x...
Page 300: ...701P47693...
