262
Configure IPP
1.
Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.
Press
Enter
.
2.
Click the
Properties
tab.
3.
Click the plus (+) symbol to the left of
Connectivity
, then the
Protocols
file folder.
4.
Select
IPP
in the directory tree.
5.
The available selections include:
Port Number Static Display, with a default value of 631. This is the port number assigned by IANA
(Internet Assigned Numbers Authority.
Additional Port Number entry box. You can enter port 80 (HTTP) here as a backup port.
A TBCP Filter checkbox (displayed when PostScript is enabled).
Administrator Mode checkbox. This is disabled by default. Consult the On-Line Help for use of this
feature.
DNS checkbox.
Connection Time-out entry box.
6.
Verify that the
DNS
checkbox is checked (enabled) by default. If enabled, the DNS Server will be
available to resolve Host Names to IP Addresses, in support of printing with IPP.
7.
Enter a
Connection Time Out
value for jobs being sent to the Device through this Port. This is the
length of time that the Controller will wait for an end of job command before printing the current job.
8.
Click the
Apply
button to accept changes, or the Undo button to return settings to their previous
values. Note: Setting changes are not applied until you restart the Device. There is a convenient
Reboot Machine
button on the Status tab of Internet Services.
Summary of Contents for WorkCentre 7335
Page 1: ...System Administrator s Guide 701P47693 WorkCentre 7328 7335 7345...
Page 12: ...x...
Page 300: ...701P47693...
