227
Configuring a precise Bates Stamp location (if available)
1.
Press the
Log In / Out button
on the Control Panel.
2.
Press the
"1" key
on the numeric keypad five consecutive times. (This is the factory default
"password.")
3.
Press the rectangular
Enter button
on the touch screen.
4.
Press the
Machine Status button
.
5.
Touch the
Tools tab
.
6.
Press
Copy Service Settings
.
7.
Press
Copy Control
.
8.
Press the down arrow to scroll to the Bates Stamping selection lines.
9.
Press the applicable Bates Stamp position lines to set the precise location for your Bates stamp, using
x and y axes.
10. Press
Change Settings
to change settings.
11. Press
Save
to save your changes.
12. Press
Close
until the System Settings screen is displayed.
13. Press
Exit
on the System Settings screen to return to the Main (All Services) screen.
Note: If you press the Copy Defaults button, after pressing Copy Service Settings on the Tools tab,
many annotation settings are available for selection and modification.
Summary of Contents for WorkCentre 7335
Page 1: ...System Administrator s Guide 701P47693 WorkCentre 7328 7335 7345...
Page 12: ...x...
Page 300: ...701P47693...
