186
Configure Remote Authentication for LDAP
Refer to your LDAP server documentation for the full range of information that can be entered into this
LDAP dialog to fully support both E-mail applications and authentication using your LDAP server.
The path to the LDAP dialog is as follows:
At Your Workstation:
1.
With the Authentication Configuration web page still running, click
Configure
next to the server you
wish to use for Authentication. If not still running, perform steps 2 and 3 below.
2.
If the web page is not still running, open your Web browser and enter the TCP/IP address of the
machine in the Address or Location field. Press
Enter
.
3.
Click the
Properties
tab. Note that (as of February 2007) you can either return to the Security folder
and the Authentication Configuration hot link (discussed on the previous page), or use the alternative
path, stated below.
4.
Select the
Remote Authentication Server / Directory Service
folder in the list of hot links, select
Authentication System
and pick LDAP from the drop-down list. Click
Apply
.
5.
Select
LDAP Server / Directory Service
.
6.
Enter the
Primary Server IP address (or host name)
in the box supplied. Note: If entering a fully
qualified host name (for example, ldapserver.xerox.com), make sure that the specified domain name
matches the device’s TCP/IP configuration (domain name shown under DNS on the device’s
Configuration Report).
7.
Enter the
Primary Server Port Number
(default of 389).
8.
If available, decide whether or not to use encryption (
Authentication with SSL
) when accessing the
LDAP server.
9.
For
Authentication Method
, choose either Direct Authentication or Authentication of User Attributes.
Direct Authentication
sets authentication with the LDAP server with the user ID and password
supplied by the user. If you choose Direct Authentication, when a user presses a button at the device
for a restricted service, they will be prompted for their LDAP credentials. If you select
Authentication
of User Attributes
, authentication will be based on the attributes entered into this dialog, such as
samAccountName or uid, for Attribute of Login User Name, or mail for Attribute of Typed User Name.
Note that there are a number of other LDAP attributes that can be entered into this dialog.
10. The
Search Login Name
box can be left blank.
11. The
Search Password
and
Re-enter Search Password
boxes can be left blank.
Summary of Contents for WorkCentre 7335
Page 1: ...System Administrator s Guide 701P47693 WorkCentre 7328 7335 7345...
Page 12: ...x...
Page 300: ...701P47693...
