83
Enabling the E-mail Ports and Setting TCP/IP
First enable the E-mail ports, then set the IP address.
Note: The configuration can also be performed using CentreWare Internet Services.
Note: For information on how to use CentreWare Internet Services, refer to the Internet Services
section of this guide.
1.
Display the System Administrator Menu screen.
a.
Press the
Log In/Out
button.
b.
Enter the user ID with the numeric keypad or the keyboard displayed on screen, and select
Enter
.
Note: The default user ID is “11111”. When using the Authentication feature, a password is required.
The default password is “x-admin”.
c.
Select the
Machine Status button
on the Control Panel.
2.
Enable the ports used for E-mail.
a.
Select the
Tools tab
.
b.
Select
Connectivity & Network Setup
.
c.
Select
Port Settings
.
d.
On the Port Settings screen, select
Send E-mail
and then select
Change Settings
.
e.
On the Send E-mail screen, select
Port Status
and select
Change Settings
.
f.
On the Send E-mail Port Status screen, select
Enabled
then select
Save
.
g.
Select
Close
.
h.
On the Port Settings screen, select
Receive E-mail
, then select
Change Settings
.
i.
On the Receive E-mail screen, select
Port Status
, then
Change Settings
.
j.
On the Receive E-mail Port Status screen, select
Enabled
, then select
Save
and
Close
.
k.
On the Port Settings screen, select
Mail Notice Service
, then select
Change Settings
.
l.
On the Mail Notice Service screen, select
Port Status
, then
Change Settings
.
m. On the Mail Notice Service – Port Status screen, select
Enabled
, then
Save
.
n.
Select
Close
until the Tools tab screen is displayed.
Summary of Contents for WorkCentre 7335
Page 1: ...System Administrator s Guide 701P47693 WorkCentre 7328 7335 7345...
Page 12: ...x...
Page 300: ...701P47693...
