Xerox WorkCentre 7335, System Administrator Manual

Page: 15 / 300

3
Configuration Report
To print a Configuration Report, with the Device switched ON , perform the following steps:
1. Press the Machine Status button .
2. Press the Print Reports button .
3. Press the Copy Reports button .
4. Press the Configuration Report button .
5. Press the large, green, Start button , located to the immediate right of the Control Panel’s numeric
keypad.
6. The printing process will be graphically displayed on the touch screen. Upon receipt of the
Configuration Report, note that the multi-page print is formatted into two columns with horizontal ruled
lines indicating four distinct data display areas on the print.
• The first area displays System Settings.
• The second area displays Copy Service Settings.
• The third area displays Print Service Settings.
• The fourth area displays Communication Settings.