Xerox WorkCentre 5320, Administrator'S Manual

Page: 58 / 160

Security
WorkCentre 5300 Series Multifunction Printer
System Administrator Guide 58
Certificate Revocation Retrieval Settings
1. In CentreWare IS, click Properties > Security > Certificate Revocation Settings .
2. Under General , select the Level of Certificate Verification .
• Low : The revocation status of certificates is not checked. The printer verifies that the
certificate has not expired, and the certificate issuer and signature are valid.
•
Medium
: The revocation status of certificates is checked. If the certificate status cannot be
obtained due to a network error, the certificate is still considered valid.
• High : The revocation status of certificates is checked. The certificate is only considered valid
after successfully verifying that the certificate has not been revoked.
3. Under
General
, select the
Retrieval of Certificate Status
.
4. If you selected OCSP as the retrieval method, under
OCSP
, next to
Send Query to OCSP
Responder With , select URL as Specified in Certificate or URL as SPecified by Administrator.
5. Type the URL of OCSP Responder
6. Type the OCSP Communication Time-Out (5-60 seconds).
7. If you selected CRL as the retrieval method, under CRL , next to Auto Retrieval of CRL , select
Enabled
if desired.
8. Type the
CRL Retrieval Time-Out
(5-60 seconds).
9. Click
Apply
to accept the changes or
Undo
to retain the previous settings.