Xerox WorkCentre 5320, Administrator'S Manual

Page: 28 / 160

Network Configuration
WorkCentre 5300 Series Multifunction Printer
System Administrator Guide 28
5. Under Traps, select the type of Traps to be Received by the SNMP manager.
6. Click Apply .
Adding IPX Trap Destination Addresses
Internetwork Packet eXchange (IPX) is a routing protocol used by Novell NetWare environments.
1.
In CentreWare IS, click Properties > Connectivity > Protocols > SNMP .
2. Click Advanced at the bottom of the page.
3. Under Trap Destination Addresses , click Add IPX Address .
4. Type the 8-digit hexadecimal number that identifies the IPX External Network host configured to
receive the trap.
5. Type the 48-bit
Physical MAC Address
of the computer running the SMNP manager application
that is to receive the trap.
6. Type the IPX Socket Number of the computer running the SNMP manager application configured
to receive the packets.
7. Select the SNMP version,
SNMP v1
or
SNMP v2c
based on the trap receiving system.
8. Under
Traps
, select the type of
Traps to be Received
by the SNMP manager.