Initial Setup
WorkCentre 5300 Series Multifunction Printer
System Administrator Guide
17
Initial Setup in CentreWare IS
CentreWare IS is an application on the printer’s embedded Web server that allows you to configure
and administer the printer from a Web browser on any computer.
Accessing CentreWare IS
Before you begin:
•
TCP/IP and HTTP must be enabled to access CentreWare IS. If you disable either of these services,
you must enable them at the printer before you can access CentreWare IS. For details, see
Accessing CentreWare IS
on page 17.
•
Refer to the Configuration Report to determine your printer’s IP address.
To access CentreWare IS:
At your computer, open a Web browser, type the printer’s IP address in the address field, then press
Enter
or
Return
.
Notes:
•
If your printer is locked, type the system administrator user name and password to
access the Properties tab. The administrator user name is
admin
and the default
password is
1111
.
•
To see the IP address of the printer, press the
Machine Status
button on the control panel.
Changing the System Administrator Password
Xerox recommends that you change the default system administrator password after you configure
the printer for security. Be sure to store the password in a secure location.
To change the administrator password:
1.
In CentreWare IS, click
Properties
>
Security
>
System Administrator Settings
.
2.
Next to
Administrator’s Passcode
, type the new password
3.
Retype the password to verify.
4.
Change the
Administrator’s Login ID
or the allowed maximum number of login attempts if desired.
5.
Click
Apply
.
Accessing the Configuration Report
The Configuration Report lists the printer’s current settings. By default, a Configuration Report prints
at startup.
Printing the Configuration Report.
1.
At the printer control panel, press the
Machine Status
button and touch the
Machine
Information
tab.
2.
Touch
Print Reports
.
Summary of Contents for WorkCentre 5320
