Installing the System Drivers
Phaser® 8510/8560MFP Multifunction Product
2-12
EtherTalk
Note:
If you use EtherTalk, Macintosh computers do not require IP addresses.
Follow these steps to install the printer driver:
1.
Open the
AppleTalk Control Panel
.
2.
Verify that the
Ethernet
port is the selected network port.
3.
Double-click the installer on the
Software and Documentation CD-ROM
to install the
printer driver.
4.
Open the
Chooser
, and then click the
LaserWriter
driver.
5.
From the right column of the
Chooser
, select the system, and then click
Create
to create
the desktop system.
Macintosh OS X, Version 10.2 and Higher
Set up your system using Bonjour (Rendezvous), create a desktop USB connection, or use an
LPD/LPR connection for Macintosh OS X, versions 10.2 and higher.
Macintosh OS X, Version 10.2 and 10.3
To install the printer driver from the
Software and Documentation CD-ROM
:
1.
Insert the CD-ROM into the CD-ROM drive and select the VISE installer to install the
printer software.
2.
When installation is complete, select one of the following options:
■
Open the
Print Center
utility for Mac OS X, version 10.2.x.
■
Open the
Printer Setup Utility
for Mac OS X, version 10.3.x.
Note:
To locate utilities on the Macintosh hard drive, open the
Applications
folder, and
then open the
Utilities
folder.
3.
Confirm that the first drop-down menu is set to
Bonjour (Rendezvous)
.
4.
Select the system in the window.
5.
Select
Xerox
from the list of manufacturers in the lower drop-down menu.
6.
Select the appropriate system model from the list of available devices.
7.
Click the
Add
button.
See also:
Advanced Features Guide
at
www.xerox.com/office/8510_8560support
Knowledge Base at
www.xerox.com/office/8510_8560support