Adjusting Copying Options
Phaser® 8510/8560MFP Multifunction Product
4-15
Shifting the Image
In some cases, you may want to change the placement of the image on the copy page.
To change image placement:
1.
On the control panel, press the
Copy
button.
2.
In the menu, select
Margin Shift
, and then press the
OK
button.
3.
To increase the margin on the long edge of the copy:
a.
Select
Long Edge
, and then press the
OK
button.
b.
Select a number from
0
through
2.0
inches (in 0.1 inch increments) or from
0
through
50
mm (in 1 mm increments), and then press the
OK
button.
4.
To increase the margin on the short edge of the copy:
a.
Select
Short Edge
, and then press the
OK
button.
b.
Select a number from
0
through
2.0
inches (in 0.1 inch increments) or from
0
through
50
mm (in 1 mm increments), and then press the
OK
button.
When you select margin shift options, a page icon with arrows indicating the direction that the
image shifts appears on the right side of the control panel display.
Note:
The factory default is Off (long edge margin of 0 and short edge margin of 0).
