Installing the System Drivers
Phaser® 8510/8560MFP Multifunction Product
2-11
Windows 98 SE or Later and Windows 2000 or Later
To install the printer driver from the
Software and Documentation CD-ROM
:
1.
Insert the CD-ROM into the computer’s CD-ROM drive. If the installer does not launch,
do the following:
a.
Click
Start
, and then click
Run
.
b.
In the
Run
window, type:
<CD drive>:\INSTALL.EXE
.
2.
Select your desired language from the list.
3.
Select
Install Printer Driver
.
4.
Select the installation method you want to use, and then follow the onscreen instructions.
See also:
Advanced Features Guide
at
www.xerox.com/office/8510_8560support
Knowledge Base at
www.xerox.com/office/8510_8560support
Macintosh OS 9.x
USB
A USB-connected system does not display in the Chooser. To create a desktop USB system:
1.
Insert the
Software and Documentation CD-ROM
into the CD-ROM drive.
2.
Use the
Desktop Printer Utility
to create a desktop USB system. The utility is located in
the
PhaserTools
folder that is created during the software installation.
See also:
Advanced Features Guide
at
www.xerox.com/office/8510_8560support
Knowledge Base at
www.xerox.com/office/8510_8560support
