Xerox Phaser 3140 Service Manual Download Page 167

Page: 167 / 284

Phaser 3140/3155/3160 Printer Service Manual

8-17

Service Parts Disassembly

5. Remove 2 screws (8 mm, black, tap), one on each end of the Fuser, and gently

slide the Fuser Lamp out of the Fuser.

Caution

Hold the halogen lamp by the ends so there is no transfer of oil from your
hands onto the lamp, which can damage the lamp.

Heat Roller

PL9.0.36

Warning

Turn the printer power Off and allow the Fuser to cool 30 minutes before
performing this procedure.

1. Remove the Fuser (page 8-11).
2. Remove the Fuser Lamp (page 8-15).

s3160-136

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for Phaser 3140





























































































































































































































































































Search results

Summary of Contents for Phaser 3140

Reviews:

Related manuals for Phaser 3140

Brands by name

Popular brands

Xerox Phaser 3140, Service Manual

Search results

Summary of Contents for Phaser 3140

Reviews:

Related manuals for Phaser 3140

Brands by name

Popular brands