Xerox Phaser 3140 Service Manual Download Page 207

Page: 207 / 284

Phaser 3140/3155/3160 Printer Service Manual

8-57

Service Parts Disassembly

8. Gently turn the Engine Shield Assembly over and disconnect all cables on the

boards to remove the assembly.

9. Remove 2 screws (black, 8 mm, tap) from the power supply connector.

10. Disconnect CON2 on the Power Supply Board.
11. Remove 5 screws (silver, 6mm).

Remove the ground wire screw (silver, 6mm). Note that the ground wire screw

is slightly larger in diameter than the other screws.

12. Remove the Power Supply Board.

s3160-117

P/JCON2

s3160-040

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for Phaser 3140





























































































































































































































































































Search results

Summary of Contents for Phaser 3140

Reviews:

Related manuals for Phaser 3140

Brands by name

Popular brands

Xerox Phaser 3140, Service Manual

Search results

Summary of Contents for Phaser 3140

Reviews:

Related manuals for Phaser 3140

Brands by name

Popular brands