Xerox Phaser 3140 Service Manual Download Page 30

Page: 30 / 284

1-8

Phaser 3140/3155/3160 Printer Service Manual

General Information

Error LED

Online LED

LED State

Printer State

Red

■

The cover is open. Close the cover.

■

There is no paper in the tray. Load paper in the tray.

■

The printer has stopped due to a major error.

■

The Print Cartridge is empty, or needs to be replaced.

■

A print cartridge has reached its cartridge life.

Flashing Red

■

The Print Cartridge toner is low.

Orange

■

A paper jam/misfeed has occurred.

LED State

Printer State

Green

The printer is powered on and can be used.

Blinking Green

■

When the green LED slowly blinks, the printer is receiving

data from the computer.

■

When the green LED rapidly blinks, the printer is printing

data.

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for Phaser 3140





























































































































































































































































































Search results

Summary of Contents for Phaser 3140

Reviews:

Related manuals for Phaser 3140

Brands by name

Popular brands

Xerox Phaser 3140, Service Manual

Search results

Summary of Contents for Phaser 3140

Reviews:

Related manuals for Phaser 3140

Brands by name

Popular brands