Xerox Phaser 3140 Service Manual Download Page 66

Page: 66 / 284

3-6

Phaser 3140/3155/3160 Printer Service Manual

Error Messages and Codes

3. Remove the jammed paper by gently pulling it straight out.

Note

If the paper does not move when you pull, or if you do not see the paper
in this area, check the Fuser area around the Print Cartridge.

4. Insert the Paper Tray back into the machine until it snaps into place. Printing

automatically resumes.

Paper Jam at the Manual Tray

1. If the paper is not feeding properly, pull the paper out of the machine.

2. Open and close the Front Cover to resume printing.

s3160-099

s3160-100

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for Phaser 3140





























































































































































































































































































Search results

Summary of Contents for Phaser 3140

Reviews:

Related manuals for Phaser 3140

Brands by name

Popular brands

Xerox Phaser 3140, Service Manual

Search results

Summary of Contents for Phaser 3140

Reviews:

Related manuals for Phaser 3140

Brands by name

Popular brands