Xerox Document Centre 480 ST, System Administration Manual

Page: 44 / 322

Page 4 - 2 Xerox Document Centre System Administration Guide
Go to the Document Centre and...
1. Connect your Document Centre to the network with the
appropriate cabling.
2. Enter the Tools Menu.
a) Press the Access ( or ) button.
b) On the keypad enter 1111 or the current password. Press
the Enter button when finished. The Touch Screen will
be used for the remainder of the data entry, unless
instructed otherwise.
c) Press the Go to Tools button.
3. Enable the Network Protocol.
a) Wait for the screen to refresh and press the Connectivity
and Network Setup button.
b) Wait for the screen to refresh and press the Network
Setup button.
c) Press the NetWare button.
d) Wait for the screen to refresh and press the Protocol and
Media button.
e) Press the Enable button. If Physical Media buttons
appear, select either Ethernet or Token Ring. Press
Save.
4. Set the Frame Type.
a) Press the Frame Type button.
b) Select the frame type desired then press Save to retain
your changes and exit to the NetWare Options screen.
5. Exit the Tools Menu.
a) Press the Exit Tools button. The printer will store the
settings you have made.