Xerox Document Centre 480 ST, System Administration Manual

Page: 23 / 322

Xerox Document Centre System Administration Guide Page 2 - 1
2. H
o
w to
Co
n
n
ec
t to
E
the
rne
t or
T
o
k
e
n
2
. Ho
w
to
C
o
n
n
ect
to
Et
he
rne
t or T
oke
n
R
ing
2. How to Connect to Ethernet or
Token Ring Networks
Before You Connect to a 100BaseT Ethernet Network
The Document Centre Ethernet Interface has speed settings of
10Mbps (10 Megabits per second), 100Mbps (100 Megabits per
second) and Auto (AutoSensing). If your network has hubs or
concentrators that have Auto-Sensing enabled, it is possible that if
the Document Centre is set to Auto, the hub/concentrator will not
arbitrate to the correct speed.
Before you connect the printer to your network, perform the
procedure on the next page entitled How to set the Ethernet
Speed.