Xerox Document Centre 480 ST, System Administration Manual

Page: 196 / 322

Page 16 - 90 Xerox Document Centre System Administration Guide
Default Template
The Default Template Properties Page allows a Network
Administrator to modify the default template values. Information
set on this page is used to create any new templates on the
Document Centre.
The Network Administrator can revert from the changed template
to the factory default settings by clicking Restore to Factory
Defaults.
NOTE For information on editing distribution templates for scanning
using Internet Services, see the Scanning Documents section of this
chapter.
To create a default template for use with Internet Services:
1. Open your Web browser and enter the TCP/IP address of the
Document Centre in the Address or Location field.
2. Click the Properties tab or click Properties in the directory
tree.
3. Select Services, then select Distribution Templates in the
directory tree.
4. Select Default Template in the directory tree.