Xerox Document Centre 480 ST, System Administration Manual

Page: 104 / 322

Page 15 - 4 Xerox Document Centre System Administration Guide
Go to the server and...
1. Configure the Service and Queue
a) Using the MUSER utility, create a user name and assign
a password for the printer. The user name and password
must be the same that were entered at the Document
Centre.
b) Using the MSERVICE utility, highlight and select ADD
a server-based service.
c) At the Add A Service Screen, enter the StreetTalk
name and description when prompted.
d) Select the server on which you want to create the
service.
e) Select Banyan Print Service.
f) Select an appropriate disk location when prompted.
g) A message will be displayed stating that the service is
running, but is not yet available to users.
h) Press the F10 key to continue.
i) The Configure Queue Screen will be displayed.
j) Press the F10 key to accept the defaults.
2. Configure the Paper Formats
a) The Configure Paper Formats Screen will be
displayed.
b) Press the Escape key to continue without making any
changes.