manualshive.com logo in svg

Xerox Document Centre 480 ST, System Administration Manual

Share
Download
Xerox Document Centre 480 ST System Administration Manual Download Page 292

Page 21 - 4

Xerox Document Centre System Administration Guide

HTTP

Note: Internet Services (HTTP/IPP) must be enabled, if it 
is not follow these procedures.

1.

Go to the Document Centre control panel.

2.

Enter the Tools pathway. 

a)  Press the  Access (  or 

) button.

b)  On the keypad enter 1111 or the current password. Press 

the Enter button when finished. The Touch Screen will 
be used for the remainder of the data entry, unless 
instructed otherwise.

c) Press 

the 

Go to Tools button.

3.

Enter Network Setup.

a)  Wait for the screen to refresh and press the Connectivity 

and Network Setup button.

b)  Wait for the screen to refresh and press the Network 

Setup button.

4.

Enable HTTP/IP.

a) Press 

the 

TCP/IP Options button.

b) Press 

the 

HTTP/IPP button.

c) Press 

the 

Enable button.

d) Press 

the 

Save button.

e) Press 

the 

Close button - 3 times.

5.

Is E-mail enabled?

a)  If yes, then Press the Exit Tools button.

b)  If no, continue to next page.

Summary of Contents for Document Centre 480 ST



































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands