Xerox Document Centre 480 ST, System Administration Manual

Page: 165 / 322

Xerox Document Centre System Administration Guide Page 16 - 59
1
6
. Int
ern
et
Se
rv
ic
es
16
. Int
e
rne
t Se
rv
ic
e
s
5. Click Edit SNMP Properties. You will be prompted for the
the Administrator name and password. Enter these and click
OK.
6. Enter a name (up to 256 characters) for the GET Community
Name. The default is public.
7. Enter a name (up to 256 characters) for the SET Community
Name. The default is private.
NOTE If you change the GET and/or SET Community Names, you must
change all network applications that are communicating via SNMP
with this Document Centre to use the new GET/SET names.
8. Enter a name (up to 256 characters) for the default TRAP
Community Name. The default is SNMP_trap.