Xerox Document Centre 480 ST, System Administration Manual

Page: 253 / 322

Xerox Document Centre System Administration Guide Page 20 - 3
20
. Scan
Se
tup
w
ith
ou
t C
en
tr
e
W
a
re
20.
Sca
n
Se
tu
p wi
th
out
C
e
nt
re
Ware
Who Should Use This Guide
This chapter is a companion to the Network Scanning Services
Guide and is intended to be used by System Administrators who are
setting up network scanning without using CentreWare Network
Scanning Services. CentreWare Network Scanning Services is
intended for use on Windows based workstations.
There are two other options for setting up scanning services:
• Setting up Native Scanning
• Setting up Scanning Using CentreWare Internet Services
Both of these set up options require the use of procedures in this
guide. For Setting up Scanning Using CentreWare Internet
Services, you will need to complete some processes, and then refer
to the Internet Services Guide to complete the set up. All of the
procedures for setting up Native Scanning are included in this
section.
There are two options for file transfer if you are setting up Native
Scanning or Scanning Using CentreWare Internet Services.
• Setting Up Scanning - NetWare (NCP)
• Setting Up Scanning - FTP (File Transfer Protocol)
Procedures for both of these file transfer options are contained in
this guide.
NOTE If you will be using Xerox’s CentreWare Network Scanning
Services to set up scanning on the Document Centre, refer to the
Network Scanning Services Guide guide now.
To use the procedures in this guide effectively, you must have
experience working in a network environment. You must also have
access to the network and possess Supervisor (Administrator) rights.
You may also require documentation provided by network and
client workstation vendors.