![background image](http://html2.mh-extra.com/html/xerox/cipress-325/cipress-325_customer-help-information_3806560021.webp)
Restarting the CiPress
™
Printer UI
Note
Only step 1 needs to be performed with the CiPress™ Printer(s) in a Simplex Configuration.
1. On the Primary CiPress
™
Printer UI, select Power > Restart.
2. Wait for a pop-up window to display on the Primary CiPress
™
UI.
3. On the Secondary CiPress
™
UI, select Restart from the pop-up window.
Restarting the CiPress
™
Printer
This procedure should only be performed as directed by a procedure or by a Xerox
representative. See
CiPress™ System Power Overview
for the standard power on and
power off procedures.
Use this procedure to restart the CiPress
™
System when in a simplex or duplex
configuration.
Important
The FreeFlow Print Server should be powered on while performing this procedure.
1. On the Primary CiPress
™
Printer UI, ensure that the current state is NOT READY.
2. Select Power > Shutdown.
A confirmation window displays.
3. Select Yes.
A pop-up window displays on the Secondary CiPress™ Printer UI if a Tandem
Configuration is used.
4. If it exists, on the Secondary CiPress
™
Printer UI, select Shutdown > Yes from the
pop-up window.
5. Wait until the Touch Screen display(s) no longer show an image.
6. Switch the Power Supply Knife Switches to the Off position. The Knife Switches are
located nearby the Printer.
• United States: 480 VAC and 208 VAC
2-5
Xerox
®
CiPress™ 325 / 500 Production Inkjet System
Customer Help Information
Power Management
Summary of Contents for CiPress 325
