![background image](http://html2.mh-extra.com/html/xerox/cipress-325/cipress-325_customer-help-information_3806560059.webp)
11. Select the check boxes for Pinfed and / or Perforated if they apply.
Tip
Selecting the Pinfed check box causes the CiPress
™
to use wider pinfed Edge Erase
margins. The nominal margin for pinless paper is 0.1575 inches / 4 mm. The nominal
margin for pinfed paper is 0.4 inches / 10.2 mm. If the pinless margin is used for
pinfed paper, the CiPress
™
will jet through the pinholes.
Note
Oversize pin holes, for example, 0.19 inches / 4.75 mm versus 0.1575 inches / 4.0 mm,
are the holes that occur immediately before and after a perforation. If you are running
pinfed stock with oversize pin holes, checking Register Page Frame to Oversize Pin
Holes will instruct the CiPress
™
to center the top of form between two adjacent oversize
holes.
12. Select the Pre-Printed Mark check box if the paper has pre-printed marks on it.
If you select Pre-Printed Mark, the Pre-Printed Mark sub-tab becomes active.
Note
If the paper does not have pre-printed marks, skip ahead to Step 27.
13. On the Pre-Printed Mark sub-tab, select the type of mark, either TOF or ROF. The
pre-printed mark should be defined to match the actual pre-printed mark on the
paper type to be used for printing.
If you select TOF, values are required for paper Height and Width, as well as Y Location
and X Location. If you select ROF, you only need to supply values for Y Location and
X Location.
Note
All the default values for TOF and ROF are the minimums for the range of acceptable
values.
14. If the Height field is available, select Inch or MM for the measurement unit.
15. Select the Height field.
The number pad opens.
16. Type or select the numerical height value and select OK.
The number pad closes and the new value displays in the Height field.
Note
Height is measured in the process direction.
17. If the Width field is available, select Inch or MM for the measurement unit.
18. Select the Width field.
The number pad opens.
4-29
Xerox
®
CiPress™ 325 / 500 Production Inkjet System
Customer Help Information
Operating the CiPress™ User Interface
Summary of Contents for CiPress 325
