![background image](http://html2.mh-extra.com/html/xerox/cipress-325/cipress-325_customer-help-information_3806560160.webp)
14. Check the Print Head connectors to ensure they are fully seated.
Note
See steps 20 and 21 of the respective Print Head replacement procedure for more
information on the connectors.
•
How to Replace Print Heads from Left Marking Tower
.
•
How to Replace Print Heads from Right Marking Tower
Action
Result
The connectors are not fully
seated.
1.
Ensure that the connectors are fully seated.
2.
Follow steps 22-27 of the respective Print Head
replacement procedure.
Note
Do not run DC 965 or DC 141 after closing the
respective Marking Tower Front Door.
3.
Use the Check Pages feature to print 100 frames of a
job.
Note
For more information on enabling this feature, see
Setting the Number of Pages for a Check Page Routine
and
Printing a Check Pages Routine
4.
If the same fault occurs again, and continue with
the next step.
If the same fault does not occur again, the procedure
is complete. Run DC 965 and DC 141 prior to printing
any jobs.
Continue with the next step.
The connectors are fully
seated.
Note
Before performing the next step, record which Print Head has the fault so that you
can more easily locate it at a later time.
Xerox
®
CiPress™ 325 / 500 Production Inkjet System
5-58
Customer Help Information
Problem Solving
Summary of Contents for CiPress 325
