manualshive.com logo in svg

Xerox CiPress 325, Customer Help Information, Page: 49 / 192

Share
Download
Xerox CiPress 325 Customer Help Information Download Page 49

A negative value moves the frame towards the operator side of the web.

Note

You must be logged on as an Advanced Operator or Key Operator to set or edit the Edge
Distance values.

Resolution and Speed

The CiPress

™

 marking system lays scanlines on the web at a constant rate. As a result,

as the process direction (Y) resolution increases, the web speed decreases. For optimal
image quality, the FreeFlow Print Server RIPs the job to the selected resolution and the
CiPress

™

 is set to the corresponding speed.

The CiPress

™

 UI provides a system level setting for print speed / resolution with the

following options:

Speed

Process (Y) Resolution

Cross Process (X) Resolution

500 fpm

400 dpi

600 dpi

325 fpm

600 dpi

600 dpi

The CiPress

™

 speed / resolution setting can only be changed while the CiPress

™

 is cycled

down and Offline.

Caution

When the CiPress

™

 speed / resolution is changed, the CiPress

™

 UI where the change was

made displays a message instructing the operator to ensure that any necessary engine
calibrations have been run at the new speed before printing.

Changes to the printer speed / resolution setting take effect at the next cycle up.

Note

In a tandem / duplex print line, a change to the printer speed / resolution at either
CiPress

™

 UI changes the speed of both printers.

Setting Resolution - Speed Combinations

The Resolution - Speed setting is in the Run view of the CiPress

™

 UI.

1. In the Run view, select the Resolution - Speed icon.

The Resolution - Speed panel displays.

2. Select High Resolution or High Speed.

Ink Usage Estimation

The CiPress

™

 Ink Usage Estimation feature allows you to monitor how much ink is

consumed during printing and print head maintanence. In addition, you can start and
stop ink usage monitoring, as well as view ink usage by individual color on the CiPress

™

UI.

Note

Frame level usage data is also available via a log file.

4-19

Xerox

®

 CiPress™ 325 / 500 Production Inkjet System

Customer Help Information

Operating the CiPress™ User Interface

Summary of Contents for CiPress 325

































































































































































































Reviews:

No comments