![background image](http://html2.mh-extra.com/html/xerox/cipress-325/cipress-325_customer-help-information_3806560152.webp)
These faults are
related to an
image analysis
failure while
running Color
Patches in Job.
XPE-15-22XX Faults
XPE-15-2280
Remedy:
1.
Ensure that the Image Sensor Glass is clean
.
2. Check prints for image quality defects. See
.
3. If the image is printing too close to the edge of the web, run
4. If the fault continues to occur, contact Xerox for assistance.
XPE-15-2282
Remedy:
1.
Ensure that the Image Sensor Glass is clean
.
2. Check prints for image quality defects. See
.
3. If the image is printing too close to the edge of the web, run
4. Run the Converge Roll Phase of
.
5. If the fault continues to occur, contact Xerox for assistance.
XPE-15-2283
Remedy:
1.
Ensure that the Image Sensor Glass is clean
.
2. Check prints for image quality defects. See
.
3. If the image is printing too close to the edge of the web, run
4. Run the Converge Roll Phase of
.
5. If the fault continues to occur, contact Xerox for assistance.
Xerox
®
CiPress™ 325 / 500 Production Inkjet System
5-50
Customer Help Information
Problem Solving
Summary of Contents for CiPress 325
