![background image](http://html2.mh-extra.com/html/xerox/cipress-325/cipress-325_customer-help-information_3806560164.webp)
XPE-15-XXXX Faults
XPE-15-3090
Cause: Parameter Changed while Online
Remedy:
1. Set the CiPress
™
to Offline.
2. Reset the fault.
3. Reposition all marks to be within the printable area of the page.
4. Set the CiPress
™
to Online.
XPE-15-3095
Cause: Test Pattern Image Generation Incorrect
Remedy: Reload or adjust the web to ensure the web edge is in the correct position
per the web guides. See the Web Threading Guide for more information.
XPE-15-4000
Cause: Process Control Image
Remedy: Contact Xerox for assistance.
XPE-15-4005
Cause: Form Length Incorrect. The pre-printed TOF mark setting on the CiPress
™
UI
does not reflect the web being used.
Remedy:
1. Set the CiPress
™
to Offline.
2. Reset the fault.
3. Reposition all marks to be within the printable area of the page.
4. Set the CiPress
™
to Online.
Xerox
®
CiPress™ 325 / 500 Production Inkjet System
5-62
Customer Help Information
Problem Solving
Summary of Contents for CiPress 325
