3.
Is the Image Sensor docked fully into position?
Action
Result
Dock the Image Sensor.
No.
Continue with the next step.
Yes.
4.
Check the web settings on the CiPress
™
UI to ensure that they are correct.
Action
Result
Correct the web settings and continue with the next step.
The settings are incorrect
for the current web loaded.
Continue with the next step.
The settings are correct for
the current web loaded.
5.
Select Select All and Start.
6.
Run DC 141 Head Setup and select the Converge Roll and Correct Ydp Phases.
Action
Result
Troubleshoot the fault. See
A fault occurs.
Continue with the next step.
The diagnostic routine runs
without any faults.
7.
At the post-processing device, remove the last test pattern printed on the web for
analysis.
5-21
Xerox
®
CiPress™ 325 / 500 Production Inkjet System
Customer Help Information
Problem Solving
Summary of Contents for CiPress 325
