Xerox CiPress 325, Customer Help Information

Page: 60 / 192

19. Type or select the numerical width value and select OK.
The number pad closes and the new value displays in the Width field.
Note
Width is measured in the cross process direction.
20. Select Inch or MM for the Y Location measurement unit.
21. Select the Y Location field. The Y location is the location of the mark from the top
of the form.
The number pad opens.
22. Type or select the numerical Y location value and select OK.
The number pad closes and the new value displays in the Y Location field.
Note
The Y Location is measured in the process direction.
23. Select Inch or MM for the X Location measurement unit.
24. Select the X Location field. The X location is the location of the mark from the
outboard web edge.
The number pad opens.
25. Type or select the numerical X location value and select OK.
The number pad closes and the new value displays in the X Location field.
Note
The X Location is measured in the cross process direction.
26. From the Mark Side on Upstream Printer menu, select Front Side or Back Side.
Note
The Front Side is the upstream printed side.
27. When you are finished setting values, select the Save icon.
Note
If you attempt to save a paper definition before providing the required values, a
warning dialog will display.
The Save Paper window opens.
28. Select the Enter Name field.
The Value window opens.
Xerox
®
CiPress™ 325 / 500 Production Inkjet System
4-30
Customer Help Information
Operating the CiPress™ User Interface