![background image](http://html2.mh-extra.com/html/xerox/cipress-325/cipress-325_customer-help-information_3806560106.webp)
The outlined area indicates the viewing door for the Thermal Controller readout
screens and Control Panel.
Caution
Do not open the viewing door to make Set Point temperature adjustments or to
use the Control Panel. Damage to the Thermal Controller could result. Always
contact Xerox for assistance.
4
The power indicator light for the Thermal Controller.
5
The power on / power off switch for the Thermal Controller.
Note
Do not power on or power off the Thermal Controller unless directed by Xerox
service personnel or a written procedure. The Thermal Controller power state is
determined by the CiPress
™
power state. For example, if the CiPress
™
is powered
on, the Thermal Controller is powered on. If the CiPress
™
is powered off, the Thermal
Controller is powered off.
6
The Emergency Stop switch for the Thermal Controller.
Note
See the Safety and Certifications Guide for more information on what to do in an
emergency situation.
7
Note
There are three temperature zones. Each zone is represented by a dual-LED number
readout and is labeled accordingly as Zone 1, Zone 2 or Zone 3. The number displayed
on the bottom represents the Set Point (SP), or the desired fluid temperature of a zone.
The number displayed on the top represents the Present Value (PV), or the actual
temperature of the fluid within a zone.
Xerox
®
CiPress™ 325 / 500 Production Inkjet System
5-4
Customer Help Information
Problem Solving
Summary of Contents for CiPress 325
