Xerox CiPress 325, Customer Help Information

Page: 138 / 192

Color-to-color misregistration is defined as multi-layer lines, offset of colors, and fuzzy
text.
Use the following procedure to problem solve color-to-color misregistration.
1. Is the Color Patches in Job feature enabled?
Action
Result
Enable the Color patches in Job feature. (Interval of 100)
No.
Check that the color patch interval is set to 100. Continue
with the next step.
Yes.
2. Has the Image Sensor Glass been cleaned recently?
Action
Result
Clean the Image Sensor Glass. Not sure.
Clean the Image Sensor Glass. No.
Continue with the next step. Yes.
3. Is the Image Sensor docked fully into position?
Action
Result
Dock the Image Sensor. No.
Continue with the next step.
Yes.
4. Run DC 141 Head Setup and select Register Heads Phase.
Action
Result
Troubleshoot the fault. See Print Head Fault Code Problem
Solving .
A fault occurs.
Continue with the next step. The diagnostic routine runs
without any faults.
5. Select a different interval for the Color Patches in Job feature. The interval does not
need to be set to 100. However, keep in mind that the lower the interval setting, the
greater the ability of the Printer to compensate for missing jets.
Related Topics:
Image Quality Defect Diagnosis Section
Xerox
®
CiPress™ 325 / 500 Production Inkjet System
5-36
Customer Help Information
Problem Solving