![background image](http://html2.mh-extra.com/html/xerox/cipress-325/cipress-325_customer-help-information_3806560097.webp)
How to Run DC 142 Color Maintenance
Ensure that the appropriate version of the X-Rite ColorPort software is installed on the
color calibration computer prior to performing this procedure. Contact a Xerox
representative for more information.
1. Ensure the form length is set to at least 737 mm (29 in.).
For more information on setting form length, see
Creating a New Paper Definition
and
Defining Properties and Pre-printed Marks
2. Log in as a Key Operator.
Note
Operators and Advanced Operators cannot access the
. For more
information, see
.
3. Select the Diagnostics view icon.
4. To determine if DC 141 Head Setup should be performed prior to DC 142 Color
Maintenance, see the table in the
5. Select DC 142 Color Maintenance in the Maintenance column.
Step-by-step instructions display.
6. Follow the instructions.
Several copies of the calibration targets are printed.
7. At the post-processing device, remove two copies of the calibration targets.
Note
Each copy of the calibration targets has two pages. Look at the Headers to ensure
that the proper pages are cut. Two copies are recommended to be removed in case
one is cut wrong in the following step.
4-67
Xerox
®
CiPress™ 325 / 500 Production Inkjet System
Customer Help Information
Operating the CiPress™ User Interface
Summary of Contents for CiPress 325
