![background image](http://html2.mh-extra.com/html/xerox/cipress-325/cipress-325_customer-help-information_3806560017.webp)
2
Power Management
CiPress™ System Power Overview
This section provides the procedures required to power on and power off the CiPress™
System, defined as the CiPress™ Printer, FreeFlow Print Server, and third-party
components.
These procedures provide instructions for the appropriate power on and power off
sequences of the CiPress™ Printer and FreeFlow Print Server.
•
CiPress™ System Power On Procedure
•
CiPress™ System Power Off Procedure
CiPress™ System Power On Procedure
CiPress™ System Power Overview
prior to performing this procedure.
Use this procedure when a CiPress™ System is powered off.
1. Ensure that all third-party pre-processing and post-processing equipment is powered
on according to the manufacturer's instructions.
2. Switch the Power Supply Knife Switches for the Primary CiPress
™
Printer to the On
position. The Power Supply Knife Switches are located near the CiPress
™
Printer.
• United States: 480 VAC and 208 VAC
• Europe: 400 VAC and 200 VAC
Note
If performing this procedure as a part of a
, wait at least 60
seconds before switching the Power Supply Knife Switches back to the On position.
2-1
Xerox
®
CiPress™ 325 / 500 Production Inkjet System
Customer Help Information
Summary of Contents for CiPress 325
