![background image](http://html1.mh-extra.com/html/xantrex/xdc-10-1200/xdc-10-1200_operating-manual_3287252036.webp)
About The XDC Power Supply
1–10
TM-XDOP-01XN
Table 1-6
Item Descriptions for Figure 1-5
Item
Description
1
AUX A:
Condition selected for auxiliary line A is TRUE.
2
Master:
Power supply is selected to be the master in current share
configurations.
3
Master:
Power supply is selected to be the master in current share
configurations.
4
Slave:
Power supply is selected to act as a slave in current share
configurations.
5
AUTO:
Power supply is in auto sequence operation.
6
Pause:
Auto sequence program is paused. (Output is still on.)
Press
RUN/PAUSE
key to continue.
7
SEQ:
Power supply is in auto sequence setup mode (if
Set
is also
turned on) or in auto sequence operation.
8
Trigger?:
Auto sequence program is waiting for a trigger signal to
continue execution.
9
ERR:
An error has occurred.
10
Set:
Setting or setpoint is to be entered.
11
ADR:
Power supply is being addressed (receiving data). (All
remote digital interfaces.)
12
LCL:
Power supply is under local (front panel) control.
13
SRQ:
Service request. GPIB only.
14
RMT:
Power supply is under remote control.
15
ALARM:
Power supply is operating outside the parameters the
user set by using
PROT SET
, or the power supply’s internal
temperature has exceeded an internally set trip point (OTP).
16
OUT OFF:
Power supply output is disabled; all other circuits are
active; unit is in standby mode.
17
OVP:
Power supply has exceeded an over-voltage trip point.
18
Interlock:
Signals that the external shutdown line (the safety
interlock line) has been activated, disabling the supply output.
19
OTP:
Power supply has exceeded an over-temperature trip point,
disabling the supply output.
20
OUT ON:
Output is on.
21
Bar graphs:
Graphical representation of output voltage, current,
and power.
22
CV, CC, CP:
Power supply is in constant voltage mode, constant
current mode, or constant power mode.
TM-XDOP-01XN.book Page 10 Monday, July 17, 2006 11:19 AM
Summary of Contents for XDC 10-1200
