![background image](http://html1.mh-extra.com/html/xantrex/xdc-10-1200/xdc-10-1200_operating-manual_3287252110.webp)
Operation
3–48
TM-XDOP-01XN
To set the power limit:
Step # Do This
You Will See
1
ERROR MSGS
2
until you see the “SETPT LIMIT”
option
SETPT LIMIT
3
Voltage Limit
4
2 times
Power Limit
5
High #####W
6
Use the arrow keys, or numeric keypad to
enter a value. The value must be within 0W
to 103% of the unit’s rated power and must
be higher than the power setpoint.
High #####W
7
Low #####W
The Maximum setting is
saved and the Minimum
setting appears.
8
Use the Voltage knob, arrow keys, or
numeric keypad to enter a value. The value
must be within 0W to 103% of the unit’s
rated power and must be lower than the
power setpoint.
Low #####W
9
The setting is saved and
the display returns to its
default operating mode.
MENU
ENTER
ENTER
ENTER
ENTER
TM-XDOP-01XN.book Page 48 Monday, July 17, 2006 11:19 AM
Summary of Contents for XDC 10-1200
