REGULATORY COMPLIANCE
Federal Communications Commission (FCC) Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
CAUTION
: Changes or modifications not expressly approved by the manufacturer responsible for
compliance could void the user’s authority to operate the equipment.
NOTE
: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase separation between the equipment and the receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
• Consult the dealer or an experienced radio/TV technician for help
Industry Canada (IC) Compliance Statement
Operation is subject to the following two conditions:
• This device may not cause interference, and
• This device may accept any interference, including interference that may cause undesired operation
of the device.
This product is Listed to applicable
UL Standards and requirements by
Underwriters Laboratories Inc.
Crestron Electronics, Inc.
Operations & Installation Guide - DOC. 7360C
15 Volvo Drive Rockleigh, NJ 07647
(2033190)
Tel: 888.CRESTRON
03.13
Fax: 201.767.7576
Specifications subject to
www.crestron.com
change without notice.
Further Inquiries
To locate specific information or resolve questions after reviewing this guide, contact Crestron's True Blue Support at
1-888-CRESTRON [1-888-273-7876] or refer to the listing of Crestron worldwide offices on the Crestron Web site
(www.crestron.com/offices) for assistance within a particular geographic region.
To post a question about Crestron products, log onto the online help section of the Crestron Web site
(www.crestron.com/onlinehelp). First-time users must establish a user account to fully benefit from all available
features.
Future Updates
As Crestron improves functions, adds new features and extends the capabilities of the CSA-PWS225 and
CSA-PWS450, additional information may be made available as manual updates. These updates are solely
electronic and serve as intermediary supplements prior to the release of a complete technical documentation
revision.
Check the Crestron Web site periodically for manual update availability and its relevance. Updates are identified as
an “Addendum” in the Download column.
WARNING:
To avoid fire, shock, or death; turn off power at circuit breaker or fuse and test that power is off before
wiring!
NOTES:
Install and use in accordance with appropraite electrical codes and regulations.
Crestron CSA-PWS225 & CSA-PWS450
Power Supply for Crestron
®
QMT Motors
Operations & Installation Guide
Physical Description
This section provides information on the dimensions for the CSA-PWS225/450.
CSA-PWS225 Overall Dimensions
Specifications
Specifications for the CSA-PWS225/450 are listed in the following table.
CSA-PWS225/450 Specifications
CSA-PWS450 Overall Dimensions
DESCRIPTION
The CSA-PWS225 and CSA-PWS450 power supplies are designed for use with Crestron
®
QMT motors (sold separately) and other standard Cresnet
®
products.
For simplicity in this guide the CSA-PWS225 and CSA-PWS450 shall be referred to as the
CSA-PWS225/450, except where noted.
(4) Ø 3/16 in
(Ø 6 mm)
Mounting Holes for #10 or
#8 Screws (not supplied)
(4) Ø 7/16 in
(Ø 12 mm) Typ
7 1/2 in
(191 mm)
9/16 in
(16 mm)
9 7/8 in
(252 mm)
10 7/8 in
(277 mm)
5/16 in
(8 mm) Typ
9 13/16 in
(249 mm)
1/2 in
(13 mm) Typ
8 7/16 in
(214 mm)
5 3/8 in
(136 mm)
9/16 in
(15 mm)
5 7/16 in
(139 mm)
4 Removable Plugs
for Field Wiring
4 Removable
Plugs for Field
Wiring
12 7/16 in
(317 mm)
5 3/8 in
(136 mm)
9/16 in
(15 mm)
5 7/16 in
(139 mm)
7 1/2 in
(191 mm)
1/2 in
(13 mm) Typ
13/16 in
(21 mm)
13 7/8 in
(354 mm)
14 7/8 in
(379 mm)
5/16 in
(8 mm) Typ
10 3/16 in
(259 mm)
(4) Ø 3/16 in
(Ø 6 mm)
Mounting Holes for #10
or #8 Screws (Not
Supplied)
(4) Ø 7/16 in
(Ø 12 mm) Typ
SPECIFICATION
DETAILS
Line Power
100-120 Vac, 50/60 Hz;
Nema 5-15P line cord attached for 120 Vac input;
Load Rating
CSA-PWS225
Per Segment
Total Load Rating
75 Watts @ 24 Vdc
225 Watts (75 W x 3 segments) @ 24Vdc;
Powers up to 6 QMT motors (sold separately)
CSA-PWS450
Per Segment
Total Load Rating
75 Watts @ 24 Vdc
450 Watts (75 W x 6 segments) @ 24Vdc;
Powers up to 12 QMT motors (sold separately)
Load Protection
Each segment is protected by a self resetting
thermal fuse and a replaceable 4 A slow-blow fuse
Enclosure
Wall mount, steel;
Indoor use only
Connections
Cresnet
(2) 4-pin detachable terminal blocks; Cresnet slave
ports, paralleled; Connect to Cresnet control
network, power not supplied to these connections
Cresnet power output ports with data pass-through
Segment A-C
(CSA-PWS225 only)
(6) 4-pin detachable terminal blocks comprising (2)
paralleled Cresnet ports per each of (3) output
segments; 24 Vdc power outputs
Segment A-F
(CSA-PWS450 only)
(12) 4-pin detachable terminal blocks comprising (2)
paralleled Cresnet ports per each of (6) output
segments; 24 Vdc power outputs
Wire
Connectors accept Cresnet or Cresnet-HP wire
(12 AWG max)
Dimensions
CSA-PWS225
Height
Width
Depth
CSA-PWS450
Height
Width
Depth
9 13/16 in (249 mm)
10 7/8 in (277 mm)
5 7/16 in (139 mm)
10 3/16 in (259 mm)
14 7/8 in (379 mm)
5 7/16 in (139 mm)
Weight
CSA-PWS225
CSA-PWS450
8 lb (4 kg)
15 lb (7 kg)
