wtw TresCon UNO A111, Operating Manual

Page: 21 / 208

TresCon UNO Installation
3 - 3 ba43134e08 05/2017
Fig. 3-2 Drillings for wall mounting
Mounting the enclosure
1 Assemble the mounting element (Fig. 3-1). To do so, connect
the two mounting angles (pos. 1) to the two cross members
(pos. 2). Use the screws that are screwed in the thread drillings
of the mounting angles.
2 Fix the mounting element to the wall provisionally, using the
drillings (pos. 3 in Fig. 3-2).
3 Screw the mounting element to the wall tightly, using the dril-
lings in the mounting angles (pos. 4 in Fig. 3-2). The wall will
carry the weight of the TresCon UNO over the this connection
in the final mounting condition. Only use mounting material that
is suitable for the wall material (screws, dowels, etc.).
4
4
3
296
30
55
876
527
Drill scheme (mm):
Ø9
Ø5.5 Ø5.5
Ø9
Ø9
Ø9
4 Fasten the wall mounting brackets to the rear corners of the
housing. Note: The final screw turns require enhanced force
(straddling dowel principle).
5 Hang up the enclosure in the threaded bolts of the mounting
element and fix it using the washers (pos. 4 in Fig. 3-3) and the
nuts (pos. 5).