wtw TresCon UNO A111, Operating Manual

Page: 53 / 208

TresCon UNO Initial commissioning
4 - 1 ba43134e08 05/2017
4 Initial commissioning
4.1 Checklist for initial commissioning

Is the waste water connection installed?

Is the outlet of the tray connected?

Is the sample feed connected?

Is the electrical connection according to regulations?

Are the (optional) peripheral devices (relay connections, recorder,
etc.) connected?
Note
Please read section 5.1 B
ASIC PRINCIPLES OF OPERATION
, page 5-1
before you start the following steps for the initial commissioning.
4.2 Switching on
Switching on the
TresCon UNO
Fig. 4-1 Power switch
1 Start the preparatory activities according to the checklist.
2 Open the enclosure door.
3 Use the mains switch to switch on the TresCon UNO
(position I). The analyzer module is heated to the temperature
that was set.
O
I
power switch
O
I
TresCon
Pumpschlauch Standard/Probe
blau / blau / blau
Pumpschlauch Reagenz
orange / gelb / orange
Pump Tube Standard/Sample
blue / blue / blue
Pump Tube Reagent
orange / yellow / orange
TresCon PO4-P
Reinigungslösung
Cleaning Solution H O dest.
H O dest.
2 2
Standard B
Standard B Reagenz
Reagent
Ablauf
blau
blue
V3
V2 V4
Thermoblock
Probe
Sample
V1
gelb
yellow orange
orange grün
green
blau
blue rot
red grün
green
P1 P2
P3
TresCon P04-P
Ser.-Nr. 00110010
WTW 82362 Weilheim Made in Germany