wtw TresCon UNO A111, Operating Manual

Page: 196 / 208

Appendix TresCon UNO
8 - 18 ba43134e08 05/2017
The callback is deactivated by sending the command,
"mserrcall0,0"
. It can also be deactivated in the menu for initiali-
zing the modem (Deactivating of modem). When doing so, all settings
are deactivated.
Note
Before setting up the connection for the modem the modem is always
reinitialized. This prevents the modem from losing data in the case of a
power failure. If the remote station is occupied or it is not possible to set
up the connection, the call is repeated three times.
msmcall This command activates the automatic callback function at the Tres-
Con if a message occurs.
Syntax:
msmcallNumber,T1 <CR>
Sample transmission:
The callback is deactivated by sending the command,
"msmcall0,0"
.
It can also be deactivated in the menu for initializing the modem (Deac-
tivating of modem). When doing so, all settings are deactivated.
Number Modem number of the receiving address to be called
t1 1, if the analyzer module should call when a message
occurs, (0 = deactivated)
05.08.03 10:24:13
Information call
TresCon-Modem
Module 1: H10
+++ATH
NO CARRIER