wtw TresCon UNO A111, Operating Manual

Page: 197 / 208

TresCon UNO Appendix
8 - 19 ba43134e08 05/2017
msalarmcall This command defines for different components that a call should be
made if a concentration value is exceeded.
Syntax:
MsalarmcallNumber,Interval,Value1 <CR>
Sample transmission:
The callback is deactivated by sending the command,
"msalarmcall0,0,0"
. It can also be deactivated in the menu for ini-
tializing the modem (Deactivating of modem). When doing so, all set-
tings are deactivated.
Number Modem number of the receiving address to be called
Interval Interval in minutes for the repetition of the call if the
value is exceeded permanently
Value1 Concentration value (call in the case of exceeding)
------------------------------------------------------------
05.08.03 13:22:08
Alarm call
TresCon-Modem
Module 1: 10.55 > 10.00 mg/l NOx
+++
NO CARRIER