wtw TresCon UNO A111, Operating Manual

Page: 20 / 208

Installation TresCon UNO
3 - 2 ba43134e08 05/2017
3.3 Installing the TresCon UNO
Attention
The mounting, installation and setting up of the instrument must only be
performed by trained specialist personnel after they have carefully stu-
died this operating manual.
The manufacturer reserves the right to reject any warranty claims in
case of noncompliance.
3.3.1 Wall mounting
TresCon UNO is designed for wall mounting using the mounting ele-
ment supplied. This mounting type is described in this chapter. We
recommend to leave enough room between the ground and tray of
reagents so that further containers can be stored below the tray.
Attention
When selecting the fixing elements (screws, dowels etc.) for the moun-
ting element, take into consideration the weight of the instrument (see
chapter 7 T
ECHNICAL DATA
) and the quality of the wall. The scope of
delivery does not contain any fixing elements.
Fig. 3-1 Assembling the mounting element
Picture in process
1
2