background image

Page 8

Integrated Modules

Integrated Modules

General Information

1-8

#826498 - Revision B - December, 2016

Refer to this key for an example of the model numbers. 

Model: 

ICB CE 15

2 T   F / S

International Designation

Product Configuration

Size

Number of Element Assemblies

Unit Style

Pairing Frame

Edge Style

Product Configuration 

CE  =

Cooktop Electric

CI   =

Cooktop Induction

CG =

Cooktop Gas

MM =

Multifunction Module

SM =

Steamer Module

FM =

Fryer Module

GM =

Grill Module

TM =

Teppanyaki Module

Size 

15  =  

15 - inch wide unit

Number of Element Assemblies 

2  

=  Two element assembly unit

Unit Style 

T =   

Transitional

Pairing Frame
F = 

Pairing Frame:  Unit framed designed to match cook-

tops with “F” in the model number.  Integrated Module
frame did not change, only the model number.

Edge Style

S  

=  Stainless Steel Frame

NOTE:  On the CE152TF/S/208 the “/208” denotes a
unit designed for 208 VAC.

COOKTOP FEATURES

CE152TF/S

High-frequency pulsation technology creates superior

cooktop performance and control, at both the high end
and low end.
True Simmer setting provides the consistent low heat

you need for extended, even all-day simmering of
soups and sauces, and for confident preparation of
more delicate dishes.
Melt settings allow you to melt even fine chocolate

and other delicate foods without scorching.
Sliding touch controls with white LED lighting are easy

to read and easy to use.
Hot surface indicator illuminate as a convenient safety

reminder and can remain on, even after the cooktop
controls are turned off.
Black ceramic glass is resistant to scratching, staining,

impact and heat.
Independent timer up to 99 minutes.

CI152TF/S

Induction elements heat cookware, not the glass, for a

cooler, safer cooking surface.
Cookware sensing - elements will not be energized

without an induction compatible pan on the surface.
Boost mode boosts power by diverting power from an

adjacent element.
Hot surface indicator illuminate as a convenient safety

reminder and can remain on, even after the cooktop
controls are turned off.
Black ceramic glass is resistant to scratching, staining,

impact and heat.
Independent timer up to 99 minutes.

CG152TF/S

Dual-stacked, sealed burners for precise control and

easy cleanup.
Flame recognition and automatic reignition for safety

and ease of use.
True simmer setting on all burners prevents scorching.

Push-to-activate backlit controls are invisible when the

cooktop is off.

COOKTOP FEATURES

MODEL NUMBER KEY

Summary of Contents for CE152TF/S































































































Reviews: