Page 43
Component Removal
Integrated Modules
Integrated Modules
3-11
#826498 - Revision B - December, 2016
Burner Pan Removal
To remove the burner pan, first remove the cooktop
from its installation then, (See Figure 3-18):
Remove burner assemblies.
1.
Remove knobs.
2.
Use a 3/4” wrench to remove knob bezels.
3.
Lift burner pan from burner box.
4.
Orifice Holder
To remove the orifice holder, first remove the burner
pan, then (See Figure 3-19):
Use a 3/8” open end wrench to remove the simmer
1.
gas line.
Use a 1/2” open end wrench to remove the main
2.
gas line (main gas line not shown).
Extract two screws securing orifice holder to sealed
3.
burner bracket.
Remove orifice holder.
4.
NOTES:
Support burner tube while removing or installing
•
tubes.
Do not over torque brass fittings.
•
If burner tube was kinked it must be replaced.
•
Figure 3-18. Burner Pan
Figure 3-19. Orifice Holder
Burner
Assembly
Burner
Pan
Knob
Knob
Bezel
Orifice
Holder
Main
Orifice
Screw
Sealed Burner
Bracket
