Page 21
Electronics and Gas Theory
Integrated Modules
Integrated Modules
2-11
#826498 - Revision B - December, 2016
Entering Showroom Mode - SM15TF/S, FM15TF/S and GM15TF/S
To enter Diagnostic Mode touch
“+”
pad six times.
1.
Six
“.”
displayed on the rear control zone.
2.
Touch the front control zone
HI
pad engages Showroom mode.
3.
SH
is displayed in the
TIMER
display.
•
Touch
“-”
pad returns to Error Code indicator, and
“+”
pad advances to Software Version indicator.
4.
Exiting Showroom Mode
CE152TF/S
and
CI152TF/S
- touch the front control zone
SIM/MLT
pad to disengage showroom mode.
1.
TM15TF/S
- touch the rear control zone
LO
pad to disengage showroom mode.
2.
SM15TF/S
,
FM15TF/S
, and
GM15TF/S
- Touch the front control zone
LO
pad disengages Showroom mode.
3.
Operation of Showroom Mode
No power is supplied to the heating assemblies.
•
Control operates as if power was supplied to the heating assemblies.
•
All visual and audible feedback functions as if in Operational Mode.
•
When unit is in Showroom Mode the LOCK LED is visible.
•
SH
is displayed at all times in the 2-digit display, unless the timer is activated.
•
SH
is displayed in 2-digit display 5 minutes after last Timer pad touch.
•
SM15TF/S
,
FM15TF/S
and
GM15TF/S -
when entering Showroom mode, all LED indicators are visible for
•
five seconds.
On loss of power unit returns to Showroom mode.
•
Diagnostic Mode - All Models
Used to test the unit systems, view stored error codes, view real-time readings from system sensors, and to
enter/exit Showroom mode.
Entering Diagnostic Mode - CE152TF/S, CI152TF/S and TM15TF/S
Enter Lock Mode.
1.
Touch and hold the
“+”
pad and
“-”
pad for 5 seconds.
2.
After 5 seconds enters LED test, alerting the user to remove their fingers.
3.
If another key pad sensor detects a signal, Diagnostic Mode does not engage.
•
If either the
“+”
or
“-”
pad is not released after 7 seconds, Diagnostic Mode does not engage.
•
Power to all element assemblies is disabled.
•
After 60 seconds if no input is detected the control returns to Lock Mode.
•
ALL OFF
pad exits Diagnostic Mode and the control returns to Lock Mode.
•
There are no audible signals.
•
To step through the various tests touch the
“+”
and
“-”
pads.
4.
CE152TF/S
and
CI152TF/S
: rear
“…”
display advances one LED for each test to identify which test is
•
being performed.
TM15TF/S
: front
“…”
display advances one LED for each test to identify which test is being performed.
•
Entering Diagnostic Mode - SM15TF/S, FM15TF/S and GM15TF/S
Enter Lock Mode.
1.
Touch and hold the
ALL OFF
pad for 5 seconds.
2.
After 5 seconds enters LED test, alerting the user to remove their fingers.
3.
If another key pad sensor detects a signal, Diagnostic Mode does not engage.
•
If the
ALL OFF
pad is not released after 7 seconds, Diagnostic Mode does not engage.
•
Power to all element assemblies is disabled.
•
After 60 seconds if no input is detected the control returns to Lock Mode.
•
ALL OFF
pad exits Diagnostic Mode and the control returns to Lock Mode.
•
There are no audible signals.
•
To step through the various tests touch the
“+”
and
“-”
pads.
4.
The
“…”
display advances one LED for each test to identify which test is being performed.
•