Winterthur Gas X40-B, Maintenance Manual

Page: 70 / 495

Maintenance
0380--1/A1
Winterthur Gas & Diesel Ltd.
8/ 9
Group Component Applicable Maintenance Intervals (Op. h)
6708--1 Water separator -- Do a check through sight glass of the condensate
collector
(refer to the Operation Manual 8345--1)
daily
-- Make sure that the condensate collector is not
blocked
(refer to the Operation Manual 8345--1)
1500 to 3000
-- Do a check of the water separator elements (if
necessary clean them)
1500 to 3000
-- Remove water separator for general overhaul as necessary
7
7218--1 Cylinder
Lubricating pump -- Re--manufacture cylinder lubricating pump or
overhaul on board
45000
-- Re-manufacturing 30000
-- Estimated service life: Cylinder lubricating pump 30000
Cylinder
lubricating oil
filter -- Replace the filter element upstream from the
cylinder lubricating system
as necessary
8
8135--1 Exhaust Waste
Gate (LLT) -- During a longer operation period at low engine
load, manually open the butterfly valve a
minimum of one time each week (refer to the
Operation Manual 8135--1)
-- General inspection
In accordance with the
instructions of the valve
manufacturer
Starting air
piping -- Drain (remove water) before and after every
manoeuvring period
Pressure gauges
and pyrometers -- Compare and calibrate according to master
instruments
6000 to 8000
Pipe holders -- Do a check of the fasteners at intervals, if
necessary tighten the screws
(first time after 100 Op.h, then half-yearly)
as necessary
8447--1 Non-return valves -- Do a random check 18000
8460--1 Hydraulic pipe (to
exhaust valve) -- Grind sealing faces as necessary
8733--1 HP pipe (on
cylinder cover) -- Grind sealing faces as necessary
8752--1 HP fuel pipe -- Grind sealing faces as necessary
2020
Inspection and Overhaul Intervals (Guidelines)