Winterthur Gas X40-B, Maintenance Manual

Page: 379 / 495

Maintenance
6420 − 1/A1
Winterthur Gas & Diesel Ltd.
1/ 4
Scavenge Air Receiver
Clean and do Checks
1. Clean and do Checks
Read the data in 0380 − 1 Scavenge Air Receiver for the applicable Inspection and
Overhaul Intervals to clean the scavenge air receiver. You must also clean and do a
check of the scavenge air receiver after each piston overhaul.
1) Open the covers (5 and 8, Fig. 1 ).
2) Lock the covers (5, 8) in position with the pins (6, 7) to prevent movement.
3) Clean the scavenge air receiver (SAC).
Note: The level switches LS4071A and LS4075A monitor the water level in the
condensate collectors (4). For more data, refer to the Operation Manual
4003-4 Pipe Diagram − Water Systems.
4) At regular intervals, look at the sight glasses of the condensate collector (4) to make
sure that water flows.
5) Do a check of the flaps (3) for damage, free movement and dirt. If necessary, clean
or replace the flaps (see paragraph 2 ).
6) For the relief valve check, see to paragraph 3 .
II
II
III
III
III - III
2
5
1
3
IV
IV
Fig. 1
6
WCH03761
8
7
I
I
4
For View II , see Fig. 3
2016